Automate PostgreSQL + Stripe
The production database your reports should come from. Payments, subscriptions and the events behind revenue. Put an agent between them and the hand-off stops being manual: it reads, decides, acts, and shows its work.
Report Assembler already works across PostgreSQL and Stripe — free, and it runs on your machine.
Automations teams run
Unlike field-mapping automation, the step in the middle is an agent: it can summarise, classify, judge and draft, not merely copy values from PostgreSQL into Stripe.
When a scheduled query runs in PostgreSQL…
…an agent can look up customers and charges in Stripe — after reading the context and deciding it should.
When a threshold is crossed in PostgreSQL…
…an agent can summarise revenue activity in Stripe — after reading the context and deciding it should.
When a payment succeeds or fails in Stripe…
…an agent can run parameterised queries in PostgreSQL — with the reasoning recorded in the run’s receipt.
When a subscription changes in Stripe…
…an agent can write validated rows in PostgreSQL — with the reasoning recorded in the run’s receipt.
When a dispute opens in Stripe…
…an agent can produce report extracts in PostgreSQL — with the reasoning recorded in the run’s receipt.
Copy this PostgreSQL → Stripe workflow
Start with a custom-api call to {host}:5432 and the stripe-invoice node. Configure the PostgreSQL source payload, the agent input, and the Stripe operation. The sequential template does not implement conditional writes or approval by itself.
This is a schema-checked starting point, not an end-to-end tested automation. Replace every CONFIGURE_ value, choose the operations you intend, connect credentials and map source outputs into later inputs. An edge orders steps; it does not supply a condition, an approval gate or a field mapping. Add and test those controls explicitly before any write. Cloud APIs and model providers may receive data. Keep the workflow inactive until tested with fixtures.
{
"id": "442a98bc-b4d0-4c57-a591-edc7210b3526",
"name": "PostgreSQL → Stripe",
"nodes": [
{
"id": "1a1acf68-1c1b-4f88-a2ca-f1be86033f1c",
"text": "Run on a schedule",
"x": 512,
"y": 144,
"isEditing": false,
"type": "trigger-timer",
"icon": "connect",
"category": "trigger",
"isSelected": false,
"parameters": {
"fireOnStart": "No",
"scheduleType": "Interval",
"schedule": "Every 15 Minutes"
},
"description": "Setup template for Timer Trigger. This trigger node fires the workflow at specified intervals or at a specific time. Configure credentials, inputs and output mapping before use.",
"error": null,
"isActive": false,
"output": null,
"outputs": {}
},
{
"id": "8b9e804c-b9da-4793-aa7d-c52fd4938256",
"text": "Review source and draft",
"x": 512,
"y": 336,
"isEditing": false,
"type": "agnt-agent",
"icon": "connect",
"category": "action",
"isSelected": false,
"parameters": {
"agentId": "CONFIGURE_AGENTID",
"message": "Read the PostgreSQL item. Decide whether it warrants action in Stripe, and explain why.\nSource input: CONFIGURE_SOURCE_INPUT. Produce a reviewable draft only; do not take external actions."
},
"description": "Setup template for Agent Chat. Chat with an AI agent from your agent library. Select an agent and send messages to interact with it within your workflow. Configure credentials, inputs and output mapping before use.",
"error": null,
"isActive": false,
"output": null,
"outputs": {}
},
{
"id": "f6b239ea-1c1e-49d1-a733-decf199bf6da",
"text": "Configure destination in Stripe",
"x": 512,
"y": 528,
"isEditing": false,
"type": "stripe-invoice",
"icon": "connect",
"category": "action",
"isSelected": false,
"parameters": {
"customerEmail": "CONFIGURE_CUSTOMEREMAIL",
"dueDate": "CONFIGURE_DUEDATE",
"currency": "USD",
"amount": 1,
"description": "CONFIGURE_DESCRIPTION",
"lineItems": []
},
"description": "Setup template for Stripe API. Create and send a Stripe invoice with support for single or multiple line items Configure credentials, inputs and output mapping before use.",
"error": null,
"isActive": false,
"output": null,
"outputs": {}
}
],
"edges": [
{
"id": "00459c2b-5e57-4ca6-a69d-aeb70823e238",
"start": {
"id": "1a1acf68-1c1b-4f88-a2ca-f1be86033f1c",
"type": "output"
},
"end": {
"id": "8b9e804c-b9da-4793-aa7d-c52fd4938256",
"type": "input"
},
"startX": 800,
"startY": 168,
"endX": 512,
"endY": 360
},
{
"id": "9606d14d-088d-486c-a456-c5b792536e54",
"start": {
"id": "8b9e804c-b9da-4793-aa7d-c52fd4938256",
"type": "output"
},
"end": {
"id": "f6b239ea-1c1e-49d1-a733-decf199bf6da",
"type": "input"
},
"startX": 800,
"startY": 360,
"endX": 512,
"endY": 552
}
],
"zoomLevel": 1,
"canvasOffsetX": 0,
"canvasOffsetY": 0,
"isTinyNodeMode": false
}Configure Stripe API
Create and send a Stripe invoice with support for single or multiple line items
- customerEmail — Email address of the customer to bill Current example:
CONFIGURE_CUSTOMEREMAIL. - dueDate — Due date for the invoice (YYYY-MM-DD) Current example:
CONFIGURE_DUEDATE. - currency — Currency for the invoice Current example:
USD. - amount — Amount in cents for single item (e.g., 1000 for $10.00) Current example:
1. - description — Description for single item invoice Current example:
CONFIGURE_DESCRIPTION. - lineItems — Array of line items for the invoice. Each item must have 'description' and 'amount' (in cents). Example: [{"description": "Consulting", "amount": 5000, "quantity": 2}] Current example:
[].
Install Report Assembler
Report Assembler already uses both PostgreSQL and Stripe, so installing it gives you this exact hand-off wired up — connected, editable, and running on your own machine.
Runs on your own machine · See what it does
Build it in AGNT
- Get AGNT Community Core. Free, local, no sign-up needed to run a workflow.
- Add both connections to the vault — PostgreSQL takes a local endpoint on your own machine, Stripe takes an API key pasted into the vault.
- Configure the nodes above, or start from a marketplace workflow and edit it. The agent in the middle is the part worth spending time on.
- Run it once with an approval gate in place. The receipt tells you what it read, what it concluded, and what it changed in Stripe.
PostgreSQL and Stripe — common questions
Can I connect PostgreSQL to Stripe without writing code?
You can build it entirely from the canvas. Authorise PostgreSQL with a local endpoint on your own machine, Stripe with an API key pasted into the vault, then tell the agent what metrics pulled straight from source should look like once Stripe is involved. Code is an option for the unusual cases, never a requirement for the common ones.
How is this different from a field-mapping PostgreSQL to Stripe automation?
Mapping tools move data; this reasons about it. Rather than copying a field into Stripe, the agent can weigh what arrived from PostgreSQL, classify it against criteria you wrote in prose, draft something new, and act only when it is warranted.
Does my PostgreSQL and Stripe data leave my machine?
Not to us. AGNT runs locally and both sets of credentials are encrypted on your own disk. Outbound traffic goes only to PostgreSQL, Stripe and whichever model you chose — and pointing that at Ollama or LM Studio keeps everything on your hardware.
What does a PostgreSQL and Stripe run leave behind?
Every run is recorded end to end — the PostgreSQL items examined, the decision and its reasoning, the resulting Stripe write. That record is what makes it reasonable to let this run unattended, and what lets you widen its remit on evidence.
