Automate Discord + Stripe
Community chat with an automation-friendly API. Payments, subscriptions and the events behind revenue. Put an agent between them and the hand-off stops being manual: it reads, decides, acts, and shows its work.
Support First Responder is a ready-made agent built around Discord; point its last step at Stripe to finish this hand-off.
Automations teams run
Each of these runs with a reasoning step between the two tools, so what reaches Stripe is a decision about the Discord event rather than a transcription of it.
When a message posts in a channel in Discord…
…an agent can look up customers and charges in Stripe — after reading the context and deciding it should.
When a member joins in Discord…
…an agent can summarise revenue activity in Stripe — after reading the context and deciding it should.
When a keyword appears in Discord…
…an agent can flag anomalies in Stripe — after reading the context and deciding it should.
When a payment succeeds or fails in Stripe…
…an agent can post channel messages in Discord — with the reasoning recorded in the run’s receipt.
When a subscription changes in Stripe…
…an agent can DM members in Discord — with the reasoning recorded in the run’s receipt.
When a dispute opens in Stripe…
…an agent can publish digests in Discord — with the reasoning recorded in the run’s receipt.
The Discord and Stripe hand-off, setup template
Start with the discord-api node and the stripe-invoice node. Configure the Discord source payload, the agent input, and the Stripe operation. The sequential template does not implement conditional writes or approval by itself.
This is a schema-checked starting point, not an end-to-end tested automation. Replace every CONFIGURE_ value, choose the operations you intend, connect credentials and map source outputs into later inputs. An edge orders steps; it does not supply a condition, an approval gate or a field mapping. Add and test those controls explicitly before any write. Cloud APIs and model providers may receive data. Keep the workflow inactive until tested with fixtures.
{
"id": "0a14bdea-dcf3-41b5-ab33-3e09fb786892",
"name": "Discord → Stripe",
"nodes": [
{
"id": "ce516229-50bc-425a-acd7-ecc39cde2e30",
"text": "Watch Discord",
"x": 512,
"y": 144,
"isEditing": false,
"type": "receive-discord-message",
"icon": "connect",
"category": "trigger",
"isSelected": false,
"parameters": {
"channelId": "CONFIGURE_CHANNELID"
},
"description": "Setup template for Receive Discord Message. Listen for incoming Discord messages in a specified channel and trigger the workflow when a new message is received. Configure credentials, inputs and output mapping before use.",
"error": null,
"isActive": false,
"output": null,
"outputs": {}
},
{
"id": "3ab4e4d2-248a-432f-a1cb-57cdd3155e5e",
"text": "Review source and draft",
"x": 512,
"y": 336,
"isEditing": false,
"type": "agnt-agent",
"icon": "connect",
"category": "action",
"isSelected": false,
"parameters": {
"agentId": "CONFIGURE_AGENTID",
"message": "Read the Discord item. Decide whether it warrants action in Stripe, and explain why.\nSource input: CONFIGURE_SOURCE_INPUT. Produce a reviewable draft only; do not take external actions."
},
"description": "Setup template for Agent Chat. Chat with an AI agent from your agent library. Select an agent and send messages to interact with it within your workflow. Configure credentials, inputs and output mapping before use.",
"error": null,
"isActive": false,
"output": null,
"outputs": {}
},
{
"id": "fb125e80-df9b-42c4-af32-3c6e9dd7b284",
"text": "Configure destination in Stripe",
"x": 512,
"y": 528,
"isEditing": false,
"type": "stripe-invoice",
"icon": "connect",
"category": "action",
"isSelected": false,
"parameters": {
"customerEmail": "CONFIGURE_CUSTOMEREMAIL",
"dueDate": "CONFIGURE_DUEDATE",
"currency": "USD",
"amount": 1,
"description": "CONFIGURE_DESCRIPTION",
"lineItems": []
},
"description": "Setup template for Stripe API. Create and send a Stripe invoice with support for single or multiple line items Configure credentials, inputs and output mapping before use.",
"error": null,
"isActive": false,
"output": null,
"outputs": {}
}
],
"edges": [
{
"id": "1dabf598-d461-4b2b-a43a-284925deb8fa",
"start": {
"id": "ce516229-50bc-425a-acd7-ecc39cde2e30",
"type": "output"
},
"end": {
"id": "3ab4e4d2-248a-432f-a1cb-57cdd3155e5e",
"type": "input"
},
"startX": 800,
"startY": 168,
"endX": 512,
"endY": 360
},
{
"id": "a1bbfc61-504e-49bc-abdb-de897662f718",
"start": {
"id": "3ab4e4d2-248a-432f-a1cb-57cdd3155e5e",
"type": "output"
},
"end": {
"id": "fb125e80-df9b-42c4-af32-3c6e9dd7b284",
"type": "input"
},
"startX": 800,
"startY": 360,
"endX": 512,
"endY": 552
}
],
"zoomLevel": 1,
"canvasOffsetX": 0,
"canvasOffsetY": 0,
"isTinyNodeMode": false
}Configure Receive Discord Message
Listen for incoming Discord messages in a specified channel and trigger the workflow when a new message is received.
- channelId — The ID of the Discord channel to monitor Current example:
CONFIGURE_CHANNELID.
Configure Stripe API
Create and send a Stripe invoice with support for single or multiple line items
- customerEmail — Email address of the customer to bill Current example:
CONFIGURE_CUSTOMEREMAIL. - dueDate — Due date for the invoice (YYYY-MM-DD) Current example:
CONFIGURE_DUEDATE. - currency — Currency for the invoice Current example:
USD. - amount — Amount in cents for single item (e.g., 1000 for $10.00) Current example:
1. - description — Description for single item invoice Current example:
CONFIGURE_DESCRIPTION. - lineItems — Array of line items for the invoice. Each item must have 'description' and 'amount' (in cents). Example: [{"description": "Consulting", "amount": 5000, "quantity": 2}] Current example:
[].
Install Support First Responder
Support First Responder is a working agent built around Discord. Install it, point its last step at Stripe, and you have this hand-off without building it from an empty canvas.
Runs on your own machine · See what it does
Wiring Discord to Stripe
- Install AGNT — it runs on your own machine and needs no account to start.
- Authorise Stripe (an API key pasted into the vault) and Discord (an API key pasted into the vault). Nothing is stored anywhere but your disk.
- Describe the job in plain language, or paste the definition above; discord-api does the reading and stripe-invoice the writing.
- Gate anything you would not want done unattended, then let it run and read the first receipt end to end.
Discord and Stripe — common questions
Can I connect Discord to Stripe without writing code?
No code is required. Add both connections in the vault (Discord uses an API key pasted into the vault, Stripe uses an API key pasted into the vault), then either install a marketplace workflow for this pair or drag the two nodes onto the canvas and put an agent between them.
How is this different from a field-mapping Discord to Stripe automation?
A field mapping copies values and breaks on the first record nobody anticipated. The middle step here reads the Discord item in full and decides — whether it matters, how to summarise it, and what belongs in Stripe. Deciding to do nothing is a valid outcome, which no mapping can express.
Does my Discord and Stripe data leave my machine?
Your credentials stay in a vault on your own disk rather than in someone else’s cloud. The only calls made are the ones the workflow needs: Discord, Stripe, and your chosen model provider — which can be a local one.
What does a Discord and Stripe run leave behind?
Every run is recorded end to end — the Discord items examined, the decision and its reasoning, the resulting Stripe write. That record is what makes it reasonable to let this run unattended, and what lets you widen its remit on evidence.
